PDM project converter no progress

Kataeb

Member
Join Date
Jan 2007
Location
www.livelovelebanon.com
Posts
628
Kindly, while opening a copy of a Simatic project, the manager requested a Pdm conversion, which we started. But the PDM project converter is stuck at 25% with no progress, see attached. What could be the problem? Thank you

PDM project converter  no progress.JPG
 

Similar Topics

does anyone have experience with these Reliant Electric servo drives? I get a green bus voltage light but no status light. on line manual says...
Replies
0
Views
1,240
Have recently had to install PDM (V8.1 SP1, running with Step7 V5.5 SP3), to configure some Sitrans flow sensors. Had no problems installing and...
Replies
0
Views
1,223
Hi All, I am trying to commission a S7 CPU 315-2 system with 3 CP 342-5 Profibus cards and 2 DP/PA-Link(IM153-2),DPV1. When I plug in my PC...
Replies
0
Views
1,077
An ethanol plant was closed down, sold, is now running under new owner. It needs a couple replacement temperature transmitters. The plant is...
Replies
0
Views
2,516
Can anyone tell me what this problem is and how to solve it? The error message is in the attachment. Best regards
Replies
1
Views
3,837
Back
Top Bottom