Hey guys
First thing is it possible to have 3 buttons in red lion hmi display to start 3 different fanuc programs ?
I have tried connecting Crossover cable between the hmi and fanuc trying to send registers to the fanuc but without luck.
If anyone knows how to and could point me in the direction i would be happy!
Regards
fannar
First thing is it possible to have 3 buttons in red lion hmi display to start 3 different fanuc programs ?
I have tried connecting Crossover cable between the hmi and fanuc trying to send registers to the fanuc but without luck.
If anyone knows how to and could point me in the direction i would be happy!
Regards
fannar