Hi.
I'm working on my first project with proficy machine edition (version 9.5).
Normaly i use Siemens equipment but now we're upgrading a pretty large system with a rx3i plc and quickpanel+ 12" panels.
The PLC program is running fine already as we pretty much just reused an old modicon program.
The old system lacked HMI interface so fault finding was quite time consuming for them when there was problems but we will add it now.
I just started to play with the Quickpanel and have problems when using bits in an array of bools in the plc.
It seems like i can not access them at all?
I have tried to insert the bools into different places but when simulating the panel i get question marks (?) over the button etc where i have used them and other bools works just fine.
For testing purpose i created one array tag with array dimension 1 set to 32 and array dimension 2 set to 0.
What am i missing?
The array of bools will be used to set alarm bits and show them on the HMI btw, if there is better ways to do it, please inform me.
I'm working on my first project with proficy machine edition (version 9.5).
Normaly i use Siemens equipment but now we're upgrading a pretty large system with a rx3i plc and quickpanel+ 12" panels.
The PLC program is running fine already as we pretty much just reused an old modicon program.
The old system lacked HMI interface so fault finding was quite time consuming for them when there was problems but we will add it now.
I just started to play with the Quickpanel and have problems when using bits in an array of bools in the plc.
It seems like i can not access them at all?
I have tried to insert the bools into different places but when simulating the panel i get question marks (?) over the button etc where i have used them and other bools works just fine.
For testing purpose i created one array tag with array dimension 1 set to 32 and array dimension 2 set to 0.
What am i missing?
The array of bools will be used to set alarm bits and show them on the HMI btw, if there is better ways to do it, please inform me.