Ethernet IP Adress Mapping for Compact Logix

afeefabdussamed

Member
A
Join Date
Sep 2016
Location
Jeddah
Posts
24
Dear all

Can any one guide me for mapping in compact logix in RS Logix 5000 which I will be using MOXA MB Gate 5105 for converting Ethernet IP to Modbus TCP.I am confused in Mapping.
 

Similar Topics

afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
433
JesperMP
JesperMP
A
Ethernet comm problem with PLC when inverter enables.
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
2
Replies
16
Views
474
Gleichner33
G
A
Kepware and Omron NJ Ethernet
I have a strange Kepware issue I have been dealing with for a few weeks. I have Kepware setup with the Omron NJ Ethernet driver and reading in...
Replies
0
Views
80
acborne
A
T
600 Volt High Flex Ethernet Patch Cables
Can anyone recommend a flexible 600-volt shielded ethernet patch cable? I have used them from Allen Bradley / Panduit before and they are too...
Replies
0
Views
96
Tim Ganz
T
P
Adding IAI Ethernet Device to Studio 5000 PLC V32.02 - Yellow Triangle
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC. So, I think the math is correct on the Input and Output...
Replies
0
Views
126
psychosunshine
P
Back
Top Bottom