I am getting flow rate reading meter cubic per hour in the PLC. PLC cycle time is 20 ms. I need to find out average flow reading in an hour. Could anyone suggest how to do that.
I have 2 plan :
1) integrate the flowmeter reading but i am sure the reading will be overflowed.
2) Taking only one reading in a minute and then sum it up and that reading average it with 1 hour.
I have 2 plan :
1) integrate the flowmeter reading but i am sure the reading will be overflowed.
2) Taking only one reading in a minute and then sum it up and that reading average it with 1 hour.