VPNFilter attacks SCADA systems

Also, always change the default login/password for your home router and disable WPS. Put a reminder on your calendar to check for firmware update every few months.
 

Similar Topics

Hello: Does any body have experience with tools to simulate DoS attacks, especially attacks which can exploit typical vulnerabilities of...
Replies
7
Views
2,842
https://www.securityweek.com/vulnerability-exposes-rockwell-controllers-dos-attacks Am I missing something, this seems like a fairly trivial...
Replies
9
Views
2,846
http://www.theregister.co.uk/2010/07/20/win_shortcut_vuln_exploit_code/ Somebody is definitely reading our discussions about shop floor...
Replies
13
Views
5,102
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
44
Has anyone ever seen where you have a tag reading from the plc in scada. In this instance it's just a PEC, I set it up on one scada terminal and...
Replies
0
Views
88
Back
Top Bottom