mater k120s

Hi everybody:
Is it possible to connect LS master k120s to ethernet network?
If it is possible,please I need help.
Best regards
Jesus

http://plcegitim.com/plc-kursu/wp-content/uploads/2016/12/MK120S_Users_Manual.pdf

Your PLC K120S will not communicate to a Ethernet network directly. It will however communicate serially with a Modbus RTU protocol. You can then use a protocol converter to communicate over Ethernet. Similar to the following:
http://www.redlion.net/products/industrial-automation/controllers-and-data-acquisition/data-station-plus

http://www.plctalk.net/qanda/showthread.php?t=64936

Hope this helps you out.
Regards,

Good morning Sr:
Thank you very much.I appretiate your help.
I am trying to connect an HMI weintek (eMT3070A) to a PLC (master k120s)which located at a distance impossible to be wired.Your INfo have been very usefull.
I will try to do my best, but as i have no direct experience working over ehternet in PLC and HMI communication,i still have no idea how addressing HMI to stablish comunication with the remote PLC.
Sorry for my English.

Best Regards
Jesus.

https://www.rtaautomation.com/technologies/modbus-rtu/

http://www.simplymodbus.ca/FAQ.htm

The above links are good references on Modbus protocol. It will explain how the addressing and node numbers work.

Regards,

Thank you very much sr !!
I am really thankfull.
Best regards
Jesus