S7300 CPU with FB126 profinet diagnostic - feedback delay

hill831017

Member
H
Join Date
Nov 2010
Location
CC
Posts
61
Hello, Does anybody notice or meet the same problem - diagnostic status bit in DB200(auto create by FB126) has delay for around 10s after profinet salve failed to reach.

CPU 319F-3 PN/DP, only PN100 existing, XF208,Pilze Safety, Lenze FU, Murr IO are connected.

Half of my editing....Feedback is, it was working after call FB126 in OB1,82,83,86,100.....

FYI
 

Similar Topics

E
Profibus Master Slave (2 s7300 CPU)
Experts! Advice required S7300 CPU 2 DP 315 Master Slave Profibus.(2 CPU) In My application I have to send data from Master to slave and slave...
Replies
0
Views
1,939
Engrtalha
E
E
profibus Master Slave (2 s7300 CPU
Experts! Advice required S7300 CPU 2 DP 315 Master Slave Profibus.(2 CPU) In My application I have to send data from Master to slave and slave...
Replies
0
Views
2,334
Engrtalha
E
R
MODBUS TCP Between S7300 CPU 314 and SCADAPack RTU Via CP 343-1
Dear All I have worked with MODBUS TCP and RTU many times and commissioned successfully. Here First time I m working with S7300 to establish...
Replies
8
Views
3,181
Ozzie01
O
A
S7300 CPU 315-2 DP ( SF Led Flashing )
Hello Guys, I have some problem in my CPU 315-2 DP the SF is flashing, I did everything I clean up the cpu, check the earth ground, everything is...
Replies
4
Views
5,095
apolionman
A
J
Project S7300 CPU 315 DP
Hello. I have a question regarding a PLC siemens with Profibus and drivers Brand rexroth (ECODRIVE03), would add an HMI brand siemens to the...
Replies
13
Views
6,357
JesperMP
JesperMP
Back
Top Bottom