I have a Panelview 300 Micro
CAT 2711-M3A19L1
Ser A
Rev C
It gets an error during the startup testing "ERROR! 32" which looks like the Real Time Clock test failed. I have tried to enter configuration mode during the startup by pressing UP and F1 at the same time but nothing will change on the screen. Does anyone else have a suggestion?
CAT 2711-M3A19L1
Ser A
Rev C
It gets an error during the startup testing "ERROR! 32" which looks like the Real Time Clock test failed. I have tried to enter configuration mode during the startup by pressing UP and F1 at the same time but nothing will change on the screen. Does anyone else have a suggestion?