Lexington NC ~ Omron support

geniusintraining

Lifetime Supporting Member + Moderator
geniusintraining
Join Date
Jun 2005
Location
SC
Posts
8,274
I have a customer looking for some support, they are in Lexington NC and have several Omron PLC's.... Anyone interested send me a PM with contact information and I will pass it on

Thanks
Mark
 

Similar Topics

K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
2
Views
23
Steve Bailey
Steve Bailey
M
Struggling to get good connectivity with Omron PLC (CS) and KeserverEx
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
4
Views
99
Mihir_007
M
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
7
Views
117
James Mcquade
J
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
56
Ko Lin
K
S
Omron NB Screen & NX1P2 PLC Real Number issue
I am working on a project using a NB screen and NX1P2 PLC. I am having a really hard time getting a real number to properly translate through to...
Replies
3
Views
116
drbitboy
drbitboy
Back
Top Bottom