1756-en2t

Saurabh Trivedi

Member
S
Join Date
Apr 2014
Location
Vadodara
Posts
49
Hello All,

Can we check traffic on a 1756-EN2T ethernet bridge ?

Somewhere in rockwell literature it is written that above version 18, 1756-EN2x devices have the capability of identifying the lost packets for each connection.

How it can be done, have anyone tried this before ?
 
I tried that but a lot of information is coming in it, how to get valuable things from that.
What I had understood and monitoring is the CPU utilization and maximum connections observed and the data packets send and received, which is getting after every refresh interval.
 

Similar Topics

BAJ
Set 1756-EN2T IP Address with MSG block?
So I have code to read the IP address of a 1756-EN2T with a MSG block - Get Single Attribute. Does anyone know where to find the MSG block...
Replies
12
Views
1,133
xGlory7
X
D
Sending Emails with 1756-EN2T/B
I've been trying to get this Ethernet module configured to send emails to our relay server but cannot get it to work. the EN2T is running...
Replies
7
Views
1,752
TheWaterboy
TheWaterboy
F
1756-EN2T NET LED Blinking
Dear All, I have been using 5561 CPU with redundancy, Few days ago, I have seen the message Disqualified on RM module of secondary PLC. and i can...
Replies
1
Views
758
MikeyN
MikeyN
RonJohn
1756-EN2T "lost" IP address
Good day folks, We have an L71 processor (v30.02) in a rack with an EN2T connected to the plant network & another (v10.007) used for IO only -...
Replies
2
Views
2,128
RonJohn
RonJohn
A
Multiple Asserts from 1756-EN2T Modules
I have a pair of 1756-L73 controllers on A4/A backplanes with PA72 power supplies, configured for redundant operation with RM2 and EN2T modules...
Replies
1
Views
2,761
drbitboy
drbitboy
Back
Top Bottom