Hi Guys,
First time using Rockwell CompactLogix PLC, I have no idea how to assign IP address to it.
Now PLC is powered up, only 1 "OK" light is ON but red.
It conected through a Stratix 8000 Ethernet switch, I assigned IP for the switch, but not able to see the PLC at all.
I connect it with Ethernet Cable directly tp PLC, it says the local Ethernet cable is unpluged.
I also tried BOOTP, it also not working.
Please help.
Thanks a lot.
First time using Rockwell CompactLogix PLC, I have no idea how to assign IP address to it.
Now PLC is powered up, only 1 "OK" light is ON but red.
It conected through a Stratix 8000 Ethernet switch, I assigned IP for the switch, but not able to see the PLC at all.
I connect it with Ethernet Cable directly tp PLC, it says the local Ethernet cable is unpluged.
I also tried BOOTP, it also not working.
Please help.
Thanks a lot.