PWS3261/HMI/HItech

msalman

Member
M
Join Date
Mar 2018
Location
ibd
Posts
4
help required to download program PWS3261 HMI and connect with RS232C port of PLC,
cheksum error in start(firmware problem?),
without removing checksum error ,making single button and compiling program then only application download working but no display on hmi on run,
download firmware and application not working shows timeout error
dip switches, 5 and 6 off only other all on
please help
 

Similar Topics

R
HiTech PWS3261 HMI
I am not familiar with Hitech HMI. I had to replace a defective screen with a new one. Screen was not readable on the old one and it displayed...
Replies
2
Views
3,294
andybutcher
A
F
XV-102-h3-70twrl-10 how to get the file that is running on this HMI
I have no experience with Eaton HMIs. I downloaded the Galileo software and I am trying to get the file on a HMI (XV-102-H3-70twrl-10) to modify a...
Replies
4
Views
53
ndzied1
ndzied1
C
Pro Face SP5000 HMI failed, Can I use a laptop instead?
Sorry for my lack of knowledge, beginner here. Yesterday, we had a Pro-Face SP5000 HMI fail on us. The technician said that the HMI had the blue...
Replies
1
Views
43
arpus4KM
A
P
Hello! I have a question about HMI 2711R
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
55
plc_siamens
P
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
8
Views
144
Markelov69
M
Back
Top Bottom