Scalance S602

Damain06

Member
Join Date
May 2015
Location
Uitenhage
Posts
14
Good day all
I have a slight problem with a Siemens Scalance switch S602 that I need to configure.
I need to put a production line on our local server.
The production line is line the range
172.168.x.x
subnet 255.255.255.0
our local plant network is in the range
10.10.x.x
255.255.254.0
I am suppose to use a gateway setting of
10.10.x.y
I tried various configurations with the SCT software to set the scalance up to allow data flow from the external network to the internal network and vica versa. I am unable to ping any device on the internal network from the external network.
Any advice would be much appreciated.
Thanx in advance
 

Similar Topics

Hi all, I'm having an issue with the setup of the NAT function of a Siemens S602 Scalance. I already have a working NAT functionality (see pic in...
Replies
7
Views
2,897
Hi all, is there a way to remove a Scalance S602 in TIA V13/14? Whenever I try it I get the message that it's not allowed to remove security...
Replies
2
Views
2,092
Can the XM408 Scalance Switch ( 6GK5408-4GP00-2AM2) be integrated into a Step 7 ( v5.6) project via Profinet so that we can read the switch...
Replies
1
Views
1,251
Hi Everyone, I'm currently working on some OT network upgrades for my company across two sites. Painfully, the two sites have gone in different...
Replies
1
Views
1,254
Hi All, Quick sanity check - got a PLC addressed as 10.34.62.172 - we don't want to change this address but the factory want to access some data...
Replies
3
Views
1,499
Back
Top Bottom