Hi all:
I have reading you many times helping me with other solved problems...
Now i have an Omron Cp1L, with an Analogic AD041 and i want to connect with analogic sensor 0-10V. All i have read is as simple as activate this with I/O table and vouala! but i have not this I/O table nowhere, i can´t activate the AD041 if it is not activating the bytes with the mov command. the probe works correctly because when the pressure varies the voltage varies in the expansion card but the plc does not "see" it.
Any help would be appreciated. Thank you
I have reading you many times helping me with other solved problems...
Now i have an Omron Cp1L, with an Analogic AD041 and i want to connect with analogic sensor 0-10V. All i have read is as simple as activate this with I/O table and vouala! but i have not this I/O table nowhere, i can´t activate the AD041 if it is not activating the bytes with the mov command. the probe works correctly because when the pressure varies the voltage varies in the expansion card but the plc does not "see" it.
Any help would be appreciated. Thank you