1771 ife input caculation

Hello, allThere is a caculation in a Rslogix 5 program. N9:0*0.0732 dest. at N9:3, The N9:0 value is from a 1771 ife input channel( pressure transducer). Module configuration range is 0-4095. And N9:3 is getting value which unit is MPa (**.*). I don't understand why using 0.0732 here. Which master can give me some idea? Thank you so much!

HELLOOOO,

4095 X 0.0732 = 299.75
this means that your sensor has a "Range" of 0-300.
BD

Thanks a lot. Yes the range of this pressure transducer is 0-30 MPa. So by using 0.0732. The value is **.*, Thanks again!