Ones_Zeros
Member
Hello,
I was having problems finding the correct registers
to read some of the registers on a Altivar 630 VFD.
I would like to read the following registers:
- Motor Starts
- Frequency
- Frequency Setpoint
- Power
- Speed
- Current
I have downloaded the Modbus register map
And I think my biggest issues is finding the
Correct scaling for these registers.
Do you guys know the registers and proper
Scaling that I need to use for these?
Thanks
I was having problems finding the correct registers
to read some of the registers on a Altivar 630 VFD.
I would like to read the following registers:
- Motor Starts
- Frequency
- Frequency Setpoint
- Power
- Speed
- Current
I have downloaded the Modbus register map
And I think my biggest issues is finding the
Correct scaling for these registers.
Do you guys know the registers and proper
Scaling that I need to use for these?
Thanks