Deep_arvind
Member
Hi,
Anyone in Omron networking???
see in Hardware we have Omron PLC CS1H CPU66-H and CS1WSCB 41-V1( Serial communication Board with one RS-232 and one RS 422/485 Port)since it is a SCB so we have put that inside the CPU, and CX-Programmer Version 6.11, and we have three PLC's with the same configuration. Now the thing is that we want to multidrop the PLC's. that is while connecting to say plc-1 through RS232 port and PLC1,PLC2 and PLC3 being on RS422/485 communication. I'm attaching the setup diagram for your review.
thanx....in advance
Anyone in Omron networking???
see in Hardware we have Omron PLC CS1H CPU66-H and CS1WSCB 41-V1( Serial communication Board with one RS-232 and one RS 422/485 Port)since it is a SCB so we have put that inside the CPU, and CX-Programmer Version 6.11, and we have three PLC's with the same configuration. Now the thing is that we want to multidrop the PLC's. that is while connecting to say plc-1 through RS232 port and PLC1,PLC2 and PLC3 being on RS422/485 communication. I'm attaching the setup diagram for your review.
thanx....in advance