Process Panel programming - common question

and

Member
Join Date
Nov 2009
Location
Poland
Posts
3
Hi,

I decided to start new thread because I can't find any info about Process Panel Programming Tutorial.

I'm familiar with programming PLCs ( ABB Advant, AC800, Freelance ), but I have never programmed Process Panel.
My question is:
1. How a PLC I/O is assigned to the Process Panel ?
What I mean, for example - I'd like to display AI signal on the Process Panel Display. I know PLC AI address, what should I know more to put this AI on my Process Panel graphics.

thanks in advance for help

PS
I've been lerning with Freelance PM 783F and Process Panel 245
 
Last edited:

Similar Topics

Hello Everybody I have been looking for information for setting up communication between: ABB Frelance controller PM783F and ABB Process Panel...
Replies
0
Views
2,496
Hi All, Im using Cimplicity 8.2. after the last restart Server Scada, the PTDL_RP process can not running. so Process can not be login to database...
Replies
2
Views
122
Hello parky, goghie, Brian and all of you who kindly come to help when I get stuck. I cannot look into the clock issue that parki has written for...
Replies
5
Views
809
Hi, When I use an interrupt OB (let's say OB38 which is processed every 10ms), does it read the state of the inputs at the time it is called, or...
Replies
18
Views
2,320
I have a question about process interlock naming. I want to hear opinions, as well as if there is a relevant standard. When naming specific...
Replies
3
Views
643
Back
Top Bottom