PV 1000 ports?

Mr_B

Member
Join Date
May 2005
Posts
79
We have a PV1000 connected to a ControlLogix. The PV has two Serial ports. "RS 232 DF1" and "RS 232". The ControlLogix is connected to the "RS 232 DF1"-port. What's the use of the "RS 232"-port? I tried to get comms with both the PLC and the PV similtaniously, but it doesn't work. I have to disconnect one to get to the other.

So what is it there for?
 
Thanks, so it's for a printer. Oh well. I thought I could communicate with the PV and PLC through this. Now I'll have to add a module.

Thanks again 504bloke.
 

Similar Topics

Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
76
Hello brothers We are contacting you because an error like [display change is currently controlled remotely] occurred while using the equipment we...
Replies
2
Views
174
We broke the glass on the new PanelView Plus 7 .... 2 months after the install. Our vendor stated that we cannot buy the repair parts...(Touch...
Replies
5
Views
185
I am having issues getting a Red Lion HMI and Micro830 controller to communicate. I am using the cable here to connect the controller to the RS232...
Replies
0
Views
99
Hi All, I was wondering if it is possible to use parameter files that can be passed to a second page eg: --HOME ---PUMP 1 FACEPLATE (With...
Replies
4
Views
1,116
Back
Top Bottom