Add Comm Module to PV600

Good Evening Everyone,

I have a PanelView standard 600 touch only 2711-T6C2L1X(DH485) and I have a 600 T6C20L1(Ethernet). Is it possible to take the Ethernet comm module out of the 20L1 and mount it in the 2L1X? I know there is a place for it, but how do you get the 2L1X to recognize the new comm module?

Thank you in advance for any advice.

You cannot substitute communication modules in PanelView Standard terminals.

It would be neat if you could, but you can't.