Quantum CPU Configuration Problem

kamit patel

Member
K
Join Date
Jun 2007
Location
Vadodara
Posts
6
I have configured the Quantum series(Modicon)PLC with CPU: 140CPU43412A with the configuration as per attached file Qauntum Config-1.jpg & Qauntum Config-2.jpg.
If I change the segments from 3 to 7,the final Logic Editor & Segment Scheduler appears as shown in attached file Qauntum Config-3.jpg.
I transfered these changes to CPU & found that CRA module installed in I/O rack shows ERROR on module.
Can anyone pl. explain me :confused: what is the effect of changing the no. of segments in PLC Configuration even if there is no logic made in CPU?

Qauntum Config-1.jpg Qauntum Config-2.jpg Qauntum Config-3.jpg
 

Similar Topics

L
Quantum CPU 67160 & MODBUS DEVICE configuration
Hi all, I have 2x 140-67160 CPUs, these works as HOT-STANDBY arragement. Will have HMI as well. But I need to add one device that uses MODBUS. So...
Replies
0
Views
1,980
Loordi100n
L
M
In modicon quantum cpu card 140cpu43412A
When i read the specification of 140CPU43412A i observe that as remembered in specification 1. Local i/o : Maximum i/p and o/p words are 64 in...
Replies
0
Views
495
Mohammed zaid
M
M
In modicon quantum consists of main rack in which the cpu 140cpu43412A is located
Main rack contained power supply 140cps52400 and 140cpu43412A and RIO HEAD 140CRP93100 in addition to another I/o cards . Another remote rack...
Replies
8
Views
1,860
Mohammed zaid
M
R
Download Program Changes only without Modicon Quantum CPU Stop mode
Hello All, we have one machine which having Modicon quantum PLC with CPU 140 CPU 651 50. I have plan to modify small changes in PLC program. Is...
Replies
3
Views
2,125
rohit2318
R
dalporto
Schneider Quantum CPU messed-up Copro
Hi everyone. I'm brand new here. PLC / SCADA programmer for 10 years in hydro, mostly using Unity Pro, Vijeo Designer and Citect 7.10 and higher...
Replies
0
Views
1,390
dalporto
dalporto
Back
Top Bottom