WEINTEK MT8150iE HMI

Hi guys: I'm looking for, the programming software for Weintek MT8150iE, I looked for at Weintek Website, but , I can't find it
help me please
AD

EasyBuilder8000 V4.66.02.016
116.0MB
2016/12/21 4.66.02.016 Weintek HMI Configuration Software (PC)
Language: CHS/CHT/ENG/ESP/FRA/ITA/JPN/KOR/RUS
Model: MT8000/6000i series

Click to expand...

https://www.weintek.com/globalw/Download/Download.aspx

Ensure to click "Show all other software..." then scroll down...

the_msp said:

https://www.weintek.com/globalw/Download/Download.aspx

Ensure to click "Show all other software..." then scroll down...

Click to expand...

Thanks Patrick for your information, in the brochure of this HMI (MT8150iE), indicates, use Easy Builder ver. V4.00.01, but I can't find it at Weintek Website, also, I checked,EB8000 ver. V4.66.02.016 ,but I didn't find the model MT8150iE.
I thing that programming software is chinese, Do you know, Where Can I get it ?
AD.

If you can wait 9 hours, and no one else beats me to it, I will check with my distributor. I think what you have is a fairly old model. I am using Weintek on a project now but it is CMT3102X.

aedaowz said:

Hi guys: I'm looking for, the programming software for Weintek MT8150iE, I looked for at Weintek Website, but , I can't find it
help me please
AD

Click to expand...

It is really difficult to use Chinese equipment. Very unplanned and unpredictable. No support and service.
EasyBuilder Pro software version V6.02.096 03/20/2018 download and install
Be sure to select Chinese as the language of the program during installation
I hope you can work with Chinese language after installation. This is the only way
To download, you can get help from the following website
http://www.imenista.com/software%20download.html

http://www.imenista.com/swf/EBproV60002096.zip

Pay attention to the attached photo

aedaowz said:

Hi guys: I'm looking for, the programming software for Weintek MT8150iE, I looked for at Weintek Website, but , I can't find it
help me please
AD

Click to expand...

I just downloaded the following version from the program's official website
EasyBuilder Pro V6.05.02.712
715.0MB
10/29/2021

https://www.weintek.com/globalw/Download/Download.aspx

https://dl.weintek.com/EBPro/Installer/EBproV60502712.zip

I also chose simplified Chinese as the installation language
Weintek MT8150iE is available