S7-1200 to Leibinger Jet3Up Ethernet comunication

NoName

Member
Join Date
Sep 2003
Location
Domžale
Posts
273
[FONT=&quot]Hello all.[/FONT]
[FONT=&quot]I have a future project planned with a leibinger jet3up inkjet printer that I will have to send the print details to the printer via ethernet. I asked if a profinet verison is avaliable but it seems that it's not.[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Has any one worked with a Siemens PLC with this type of printer and comunication? [/FONT]
[FONT=&quot]I am guessing that I will use PUT/GET functions to send control strings to the printer? [/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Any input would be great, so that I prepaer as much as possible in advanced.[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Cheers[/FONT]
[FONT=&quot]Aleix[/FONT]
 
I would contact the manufacturer.
Based in Germany and the printer is for use in industrial applications, there is a good chance they have a sample TIA project for connecting the printer to an S7-1200 or S7-1500 PLC.
 
I did it recently. You need Tsend / Trcv as mentioned.
Get Scripting and Programming manual from manufacturer.
Communication is based on sending and receiving strings between You and the printer.
It's pretty straightforward.
 
[FONT=&quot]Hello guys.[/FONT]
[FONT=&quot]Thanks for the replies.[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]I got the mentioned manual from the manufacturer. I will also try to get in touch for a sample TIA portal project if they have it. [/FONT]
[FONT=&quot]Will post back when I starat testing. [/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Thanks again for the really usefull info.[/FONT]
[FONT=&quot]Great as always. [/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot]Cheers [/FONT]
[FONT=&quot]Aleix[/FONT]
 

Similar Topics

Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
145
Hi all, I am trying to do Modbus communications via the CB1241 RS485 Communication Board on a Siemens S71200 PLC. I am using a 1215C CPU. After...
Replies
6
Views
181
Dear Friends, I have few Profinet slaves connected to S7-1200 over Profinet. I wish get alarms and disagnostics from the devices. (IO-Link...
Replies
3
Views
138
Hi Experts, I would like to make firmware upgrade from v3.0 to v4.5 (S7-1200 CPU 1215C). Can I do it from v3.0 to v4.5? Do I need to take some...
Replies
6
Views
179
Back
Top Bottom