hbenkaab.takeda
Member
Dear Network,
I created a simple program with 3 tags In1, In2 and Out (if In1 and In2 then out) and I downloaded it to my Emulogix 5868 (I'm using Studio 5000 logix designer V32 and Studio 5000 logix emulate) . I created a display with Studio 5000 View designer an added a Numeric display to show the value of the tag "Out". Since I donc have an HMI I used the emulator of the Studio 5000 View designer. when I run the application the Numeric display become Red showing an error "BAN Controller Status Indicator Not Supported on Windows" "Enable to reach the controller emulate"
Thanks in Advance for your support.
I created a simple program with 3 tags In1, In2 and Out (if In1 and In2 then out) and I downloaded it to my Emulogix 5868 (I'm using Studio 5000 logix designer V32 and Studio 5000 logix emulate) . I created a display with Studio 5000 View designer an added a Numeric display to show the value of the tag "Out". Since I donc have an HMI I used the emulator of the Studio 5000 View designer. when I run the application the Numeric display become Red showing an error "BAN Controller Status Indicator Not Supported on Windows" "Enable to reach the controller emulate"
Thanks in Advance for your support.
