Mickey
Lifetime Supporting Member
Here you go..
Mickey
Lifetime Supporting Member
Here...
Mickey
Lifetime Supporting Member
You're welcome
Mickey
Lifetime Supporting Member
The PDF is to big to post here, if you can provide an e-mail address I will send it to you.
Private message me if you do not want to post an e-mail address on the open forum.
kolyur
Lifetime Supporting Member + Moderator
Came in just under the limit with my PDF printer.
Mickey
Lifetime Supporting Member
John,
What did you use to cut down the size? My try was about 1.2 MB with PDF995.
What did you use to cut down the size? My try was about 1.2 MB with PDF995.
kolyur
Lifetime Supporting Member + Moderator
I tried the Foxit PDF printer first and it was a little over 1MB. I haven't used this one much but it was installed with the Foxit PDF reader that I prefer over Acrobat.
I tried CutePDF next and it ended up a little smaller at 937kb.
I tried CutePDF next and it ended up a little smaller at 937kb.
Mickey
Lifetime Supporting Member
Thanks, I do have "CutePDF". I'll try it next time.
Similar Topics
Maybe some of you will find this pc application useful:
https://sites.google.com/site/step7datalogger/
PS: If some one can spare a bit of time...
I thought it's illegal to sell AB free software. What really amazed me are the bidders...
I'm responsible for a PLC lab at a small educational institution. We are using different PLC systems from multiple vendors (Schneider Electric...
Okay guys I work for a bunch of ego maniacs. I have designed a system which I have been asking about doing for weeks with no response from...
Ok so I know that SIMATIC S7-PLCSIM is out there to act as an emulator if you don't have a physical PLC to write and test programs with... but it...