Help needed on OA2-Promas System

sanket_shete

Member
S
Join Date
Jun 2005
Location
Mumbai
Posts
10
We have OA2-Promas system installed in one of our plant.
The control logic is written in step ladder format at the back end of Promas GUI.

However it is using S7 hardware to control the system (not S7-CPU)& Communication is on Profibus.

I am having very little knowledge about Promas system & now have to do some modifications in system.

Can anyone suggest any manual/link so that i can learn the system programming.

Thanks In Advance
 

Similar Topics

G
Urgent help needed: old Telemecanique/Modicon/Schneider Electric (TSXP5710). Will compensate anyone who can assist!
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
227
greekgremlin
G
S
Siemens tia help needed
Hi I’m after some help , I have a plc program with a baumer verisens vision camera attached I have got the signals working ect but I have an...
Replies
9
Views
956
stu
S
Q
Redundancy Fault - Urgent Help needed
Hi all, We are facing synching issues with redundancy module, where the Primary is ending up with disqualified secondary. Normally this would...
Replies
2
Views
623
Ken Roach
Ken Roach
B
Help Needed with PL7 pro
Hi all, I have got this machine that needs to be up and running soon. This machine has Schneider's Controller and I/O modules, 3 vfd's, 2...
Replies
2
Views
909
Ranjith
R
J
HSC help needed on AB micro 1100
Is it possible to write to the high speed counter function file "high speed preset" on an AB micro 1100. I have the HSC set up with a MOV...
Replies
3
Views
1,081
drbitboy
drbitboy
Back
Top Bottom