MISSING DEVICE in GP PRO EX V3.5

dR001

Member
D
Join Date
Nov 2015
Location
Home
Posts
13
Good day sir,

I have a task to download a program in hmi and make some additional wirings.
The program used is gp pro ex v3.5 (first time to used) , then I checked the program and i found there is missing device in I/O driver but there is addressing inside of it.Im wondering if it is still able to work after I download it.

Display unit : GP 3000 series , AGP-3300S-CA1M
and the i/o driver based on the diagram should be: HTB1C0DM9LP


Thanks,
D
 

Similar Topics

A
Can't register GSDML for APL device in TIA portal, HSP missing perhaps?
Hello Siemens experts. I am trying to register a GSDML file for an Endress & Hauser's Profinet IO over APL (Profile 4.0) compliant device. TIA...
Replies
2
Views
207
AlfredoQuintero
A
B
Honeywell HC900 "required device type DLL is missing or corrupted"
Hello... When I tried to download my configuration file to the HC900-C50S, I get the following error massage: << This operation con not be...
Replies
10
Views
4,790
basheer1
B
B
Remove device from HW with missing EDS file RSLogix 5000
Hello all Can I remove a device in RSLogix 5000 from the hardware where the EDS file is missing? How? Thanks!
Replies
1
Views
2,958
Geoff White
G
B
Beckhoff cx9020 novram device missing
At our company we are using Beckhoff a lot of cx9010 en cx9020. On one of the cx9020, after the scan devices is done in the system manager, there...
Replies
3
Views
3,348
bartmarchand
B
B
RSview-online tags missing-device shortcut not usable- Need Help!
I have a RSview Studio application that I wrote a while back. Recently the panelview plus died at my customer, and I had to change the logix...
Replies
7
Views
4,808
brettdawnj
B
Back
Top Bottom