Hi:
I'm trying to communicate a Micro820 with RSLinx Enterprise via EtherNet/IP. Micro820 is a 2080-LC20-20QWB CPU firmware 9 and RSLinx Enterprise is version 5.90.00 with October 2017 patches.
When I open communication tab, I can add the Ethernet Micro820 with the correct IP address, but when I select the CPU to create the shortcut, the Apply button turns grey and in the information bar appears the following message "Select a different path. Ethernet.Micro820 cannot be used" (Micro820 is my PLC name).
Any suggest? Rockwell Technote #602066 wasn't useful
Thanks!
I'm trying to communicate a Micro820 with RSLinx Enterprise via EtherNet/IP. Micro820 is a 2080-LC20-20QWB CPU firmware 9 and RSLinx Enterprise is version 5.90.00 with October 2017 patches.
When I open communication tab, I can add the Ethernet Micro820 with the correct IP address, but when I select the CPU to create the shortcut, the Apply button turns grey and in the information bar appears the following message "Select a different path. Ethernet.Micro820 cannot be used" (Micro820 is my PLC name).
Any suggest? Rockwell Technote #602066 wasn't useful
Thanks!