D500 Cutler Hammer Communications

Here is some info I found on the web, untested, so use at your own risk.
Please let me know if this works.
You may have to swap wires between pin 2 and pin 3 on the pc rs232 cable connector
or use a null modem adapter.
 
Last edited:

Similar Topics

I am more of a newcomer to the PLC world with the experience related to Allen Bradley and Siemens software. The D500 is a new animal for me with...
Replies
0
Views
1,039
I need to convert a D500 program to a AB PLC2. Thats right I need the abuse... I know a little about PLC2 but not much about a Eaton D500. The...
Replies
4
Views
5,873
Hi everyone, I know this is an old one but we have a d100 in our wrapper , it just stopped working. When the inputs are pressed the corresponding...
Replies
3
Views
213
Hi. We're planning ahead a cut-over (segregating some IOs on a new PLC) on a MCC Advantage Starter DeviceNet Modules which I'm 98% sure they are...
Replies
18
Views
2,300
Can a D50PGM10 handheld programmer be used to edit/view/program a D320 PLC?
Replies
0
Views
430
Back
Top Bottom