Navajoqc
Member
Good morning, I'm getting two Error Codes on my 2711-K5A1 Ser.F PanelView 550:
1. Is 208 (Unable to write to remote device)
2. 665 No PLC Communication.
I just found out we don't have any books to these PLCs, but I was told that our Electrician have the software to them.
I appreciate your help.
Navajoqc...
1. Is 208 (Unable to write to remote device)
2. 665 No PLC Communication.
I just found out we don't have any books to these PLCs, but I was told that our Electrician have the software to them.
I appreciate your help.
Navajoqc...
Last edited: