Engineer_UA
Member
Greetings,
Can a Single Pole Double Throw snap switch be furnished such that it actuates on low level or high level, but remains in "neutral" state when in a dead band region? We need a switch with two normally open contacts, with one contact closing on low oil level condition, and the other contact closing on high oil level condition. We want the switch contacts to remain open when the level is in between the two trip points.
Perhaps I need (2) SPST switches for this arrangement.
This is a Magnetrol switch.
Any thoughts?
Thanks,
EE
Can a Single Pole Double Throw snap switch be furnished such that it actuates on low level or high level, but remains in "neutral" state when in a dead band region? We need a switch with two normally open contacts, with one contact closing on low oil level condition, and the other contact closing on high oil level condition. We want the switch contacts to remain open when the level is in between the two trip points.
Perhaps I need (2) SPST switches for this arrangement.
This is a Magnetrol switch.
Any thoughts?
Thanks,
EE