1756-M16E sercos card failure during firmware upgrade

drmarty

Member
D
Join Date
Jan 2019
Location
holland
Posts
5
Im having a problem with the sercos network during firmware upgrade. Im tryimg to flash my drives from 1.135< to 1.136.




When i'm using controlflash 15.01.00 and select my 2094-BM03 drive it doesnt continue with upgrading.


My 1756-M16E has 3 solid red lights, and all my drives in the sercos network stay in step 5.




Strangely enough im doing exact the same thing with other machines and i dont have any isues with that.


Any ideas?
 

Similar Topics

R
1756-L71S
Hi all I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
Replies
2
Views
58
Revver
R
R
Allen-Bradley Analogue Input 1756-IF16 Scaling
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
14
Views
356
Rich0147
R
T
1756-IA 16/A
Hi, I have two quick questions: 1- Could I use 1756-IA16/A with TTL inputs? Sourcing (PNP)? Sinking (NPN)? Either one? 2- What does /A in the part...
Replies
6
Views
156
TOPTAB
T
H
A/I module 1756-IF16 Allen Bradley
Hi all, installed on chassis A17 an A/I from Allen-Bradley , problem is what ever I do , all channels are sticked on value 39.9 and cannot change...
Replies
1
Views
145
dummy_bit
dummy_bit
S
AB Flex IO 5000 compatibility with AB 1756-L72E processor
Hi, Is it possible to for an RIO with Flex 5000 series module, e.g. 5094-AEN2TR, to communicate with an 1756-L72E processor.
Replies
1
Views
92
Contr_Conn
Contr_Conn
Back
Top Bottom