Kataeb
Member
Kindly , in Siemens PCS7 , has anyone seen and solved this problem ?
" Maximum length of code area reached (max. 64 Kbytes) "
" Maximum length of code area reached (max. 64 Kbytes) "
Pcs7 error: Maximum length of code area reached
- Thread starter Kataeb
- Start date
cardosocea
Member
When did that error appeared? After what action?
JRW
Member
Sounds like your exceeding the size of the FC,FB or OB your trying to download
Technically the max is 65534 but.....
Technically the max is 65534 but.....
Last edited:
Turned out to be the FC50 exceeding the 63K.
It was due to lot of blocks(not inserted in runtime group) in OB100,
Thank you
https://support.industry.siemens.co...n-the-cfc-charts-are-compiled-?dti=0&lc=en-WW
It was due to lot of blocks(not inserted in runtime group) in OB100,
Thank you
https://support.industry.siemens.co...n-the-cfc-charts-are-compiled-?dti=0&lc=en-WW
Similar Topics
While trying to do a New Project Wizard in PCS7 v8.0 , we got below error . How can we find out which optional package is missing ? Thank you...
i have the attached error in AS programe in PCS7 V7.0 sp1 project
please i need to solve this problem wher i cant make compile or download
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Hello,
Is there a sequence when installing both TIA Portal and PCS7 in the same PC? First TIA and then PCS7 or viceversa?
Thanks in advance.
Hello,
I'm currently working on a project involving both PCS7 (v9.1 sp2 upd1) and a Panel Comfort system. This necessitates the use of TIA Portal...