Jasondelane
Lifetime Supporting Member
Is there any way to set up a trend analysis in CCW? I'd like to watch the Amp and frequency trend as I dial in the Accel/Decel times to keep good performance without overloading the motor.
Trend in Connected Components Workbench
- Thread starter Jasondelane
- Start date
alan_505
Lifetime Supporting Member
Not yet that I know of, rumor has it that it will be available in version 9.
Jasondelane
Lifetime Supporting Member
OP
Looks like it's not. Downloaded Version 9 this morning and no real change.
Similar Topics
Hello,
We recently upgraded our control server to a newer model. After the transition we are experiencing issues with our trend graphs to where...
Our punch press has a SLC500 with HELM weight module (HM-604-WM) for tonnage monitoring. The operator enters the weight range on the HMI, which is...
Hello. I am working in FTVSE v8. I have many trends set up some of them work others do not. The ones that don't work show the foot print of the...
Hello. I am rebuilding an HMI from 2003 with the new software Factory Talk Optix. I have a pop up box with a trendline on it. I want the ability...
Studio 5000 how do i shrink the Trend screen down or split the screen so i can see the Ladder and the trend?
