How to Set RTC in Premium PLC

itsnotrocketscience

Member
I
Join Date
Dec 2009
Location
Kapiti
Posts
1
I see from reading that it is/may be possible to set the RTC in a Premium PLC by setting %SW words and that this is somehow controlled by toggling %S50.

I was wondering if anyone can help me with an example of doing this?:unsure:

Basically I want to sync time on a PLC to a HMI PC since I don't have the luxury of SNTP in this processor.
 
PL7 premium or Unity Premium?

This is method that I use with Unity premium PlCs, same example works also with Schneider's PL7 premium, but you have to convert it to ladder format...


Lare

unity_plc_time.jpg
 

Similar Topics

A
How to Reset RTC Clock on Compact-Logix?
Good afternoon all, hope everyone is doing well. I have a Compact Logix PLC that has an RTC module installed on it. About every year, it loses the...
Replies
9
Views
2,902
Ken Roach
Ken Roach
X
How to set Micrologix RTC from ControlLogix
Problem: We need to have the clocks on all of our PLCs synchronized with our server time. No problem with the ControlLogix, we just write the...
2
Replies
15
Views
14,798
Mickey
Mickey
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
259
John Lee
J
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
87
Ko Lin
K
D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
73
Data_name
D
Back
Top Bottom