Citect and mitsubishi A1SH

Dariusch

Member
Join Date
Sep 2003
Posts
284
Hi

Can someone tell me how I best can get to A1SH on Citect.

The A1SH is connected to each an E700 terminal from Beijers.

At first I thought to get them through the Ethernet via Ethernetcard on the E700. But they are old model so I could not do so.
The system 1. is a 8rack and I have used all slots.
The system 2. i 5rack also here I have use all slots.

Can I use the programmingport or the RS232 port on the Eterminals?
The system is 60m from the Citect station.

Thank you
Dariusch
 

Similar Topics

Hi everyone, i try to connect my mitsubishi melsec fx plc with vijeo citect scada. The scada version is 7.30 and pc is windows xp. On the...
Replies
0
Views
3,348
I have a small demo-project between Citect and the FX-cpu. There is serial-communication possible, this is tested! Changing the status of an input...
Replies
8
Views
3,007
Hi, I need help in establishing communication between MelsecA3A PLC with Citect 7.2 SCADA, through communication link module AJ71UC24. The above...
Replies
0
Views
3,568
I am using Mitsubishi MX4 (Citect SCADA) I am starting a new project shortly and wondered if you could help I am trying to create individual...
Replies
0
Views
2,089
Back
Top Bottom