Siemens 3RW3950-6DC38 contol board
- Thread starter chago
- Start date
https://www.radwell.ca/Buy/SIEMENS/3RW34670DC34?redirect=true
The information above indicates that this has been discontinued. You could try to get it fixed or order a new soft start.
Regards,
The information above indicates that this has been discontinued. You could try to get it fixed or order a new soft start.
Regards,
Similar Topics
Hello,
I have a CPU 317-2DP Firmware Version V2.1.8.
In TIA Portal only V2.6 is available, and there is no option to upgrade FW.
Then I open it...
HI everyone,
i am new to Siemens plc programming and i am in need of some help.
yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Hello, good morning, I have been having two problems with the Tia Portal software.
The first is that I have installed it on my computer and...