Mitsubishi AD51H-S3 DOS software SW1IVD- AD51HP-E

PX200

Member
Join Date
May 2017
Location
Vienna
Posts
15
Hi guys,


If anyone have this software installation disc - it would be very very helpful.
(SW1IVD- AD51HP-E)

Or info about AC30R2 Cable pinout (DB25 to DB25)

I connected to intelligent module - Mitsubishi AD51H-S3 for melcard cloning purpose (Sram card), but can't establish minigfull communication.

It presetnts it self to a hyper terminal but I (obviousely) can't (or don't know) how to got any output or input - and with some copied SW install files I inherited - can't go pass "communication error AD51H"


Kind regards
 
Ok. I am able to get hello from AD51H-S3 Module, but after

S>

prompt whatever I type into dos sw it is huge lag.. almost nonresponsive..

Any ideas?
 

Similar Topics

hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Replies
3
Views
92
I have Toyopuc PLC PC10G-CPU and some communication modules of it. With this modules I'm able to connect with Ethernet, Ethernet/IP, FLnet, FRMT...
Replies
0
Views
52
In this sample programming, what does U4 mean? Any assistance would be greatly appreciated.
Replies
8
Views
170
Hi, I have a project with a R04CPU, RD77GF16 and a RJ71PN92 modules. The cell is given to me to change the program since the previous integrator...
Replies
2
Views
93
Hello I am writing to request assistance with obtaining a specific GSD file for our Mitsubishi inverter type A800-E, which is connected to our...
Replies
10
Views
227
Back
Top Bottom