Redland Brick
Member
- Join Date
- Mar 2005
- Posts
- 24
Good Morning Guys,
I need to communicate with a Micrologix 1500,but I
am having trouble getting the RS-232 DF-1 configured,I keep
getting the following error when I use the Auto -Configuration.
-Unable to open the specified com port for configuration testing.
When I click OK I get-
-RSLinx has failed to configure the Com Port
Under Configured Drivers I Get-
-Port Conflict
I believe that the Com Port 1 is busy with something else,but
nothing else is open. I remember going into something and deleting RSLinxNG.exe somewhere but I forget where. Do you
folks have any ideas.
Thanks in Advance,
I need to communicate with a Micrologix 1500,but I
am having trouble getting the RS-232 DF-1 configured,I keep
getting the following error when I use the Auto -Configuration.
-Unable to open the specified com port for configuration testing.
When I click OK I get-
-RSLinx has failed to configure the Com Port
Under Configured Drivers I Get-
-Port Conflict
I believe that the Com Port 1 is busy with something else,but
nothing else is open. I remember going into something and deleting RSLinxNG.exe somewhere but I forget where. Do you
folks have any ideas.
Thanks in Advance,