Cable redundancy status Cimplicity

ACM123

Member
A
Join Date
Feb 2020
Location
Stg
Posts
1
Hi everyone,

I have a problem, i want to know the channel status in server redundacy with cable redundacy setup , on Cimplicity v10. I tried to use the "IP status API" but but it does not signal the specific error of the channel.

Any of you guys know how to get the channel status between servers and clients?
 

Similar Topics

mad4x4
Profibus DB - Cable Redundancy
Ok here is the problem we have a Siemens DP PLC (Master) and RIO ( slave) at the end of a Fiber Cable that runs through a Slip ring via OLMs...
Replies
1
Views
485
Ken Moore
Ken Moore
M
FO cable cause contrologix redundancy disqualification
hi all, Please refer to the system configuration. When the Fiber optics line shown in black circles was removed from the network the redundancy...
Replies
0
Views
1,465
mahone
M
S
Profibus : Cable Redundancy
Is the of Cable redundancy ( i.e RS-485 Communiation cable) on PROFIBUS been implemented ? Does in achieve the purpose of HOT STANDBY in case of...
Replies
2
Views
4,796
chakorules
chakorules
T
Cable Numbering
I have an existing machine that we are adding some functionality. Currently every cable such as a cable going out to a 4-20 psi sensor for example...
Replies
3
Views
136
arpus4KM
A
D
Cable length calculation
Hello everybody, I believe that I will find experts here who have already solved a similar topic. I need to calculate the length of the...
Replies
7
Views
322
arpus4KM
A
Back
Top Bottom