Panelview Help

ngilbert · Nov 7, 2018

Ok I’m ready to pull my hair out.

Trying to get a PanelView800 to communicate with a 1769-L33ER PLC.

Doesn’t seem to want to cooperate.
PV 154.269.77.139
L33ER 154.269.77.141

Have the controller entered as 154.269.77.141,1,0 in connected components workbench. Anything I could be missing or doing wrong?

dmroeder · Nov 7, 2018

Do you have "CompactLogix 5370" selected for Controller Type?
edit: Also, what version of CCW?
What version does it show for the terminal in the settings page?

ngilbert · Nov 7, 2018

Yes on 5370 being selected
CCW 10.01.00
PV 4.012

tarik1978 · Nov 7, 2018

Check this note
PanelView 800 Terminals: Communication with CompactLogix 5370 Controllers via Ethernet
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/774421

swimmy67 · Nov 7, 2018

The IP address you have listed is not valid. The maximum for any ip is 255.255.255.255.

Here is a ip address calculator.
https://www.calculator.net/ip-subnet-calculator.html

dmroeder · Nov 7, 2018

swimmy67 said:
The IP address you have listed is not valid. The maximum for any ip is 255.255.255.255.

Here is a ip address calculator.
https://www.calculator.net/ip-subnet-calculator.html

*facepalm*

It's all about the details, I didn't even notice that...

Slwagner73 · Nov 7, 2018

Also, in the comms path top the controller you have to add I.P. whatever,1,0...

sPIiJq1AAAgFoIeQAAxRDyAACKIeQBABRDyAMAKIaQBwBQDCEPAKAYQh4AQDGEPACAYgh5AADFEPIAAIoh5AEAFEPIAwAohpAHAFAMIQ8AoBhCHgBAMYQ8AIBiCHkAAMUQ8gAAiiHkAQAUQ8gDACiGkAcAUAwhDwCgGEIeAEAxhDwAgGIIeQAAxRDyAACKIeQBABRDyAMAKIaQBwBQDCEPAKCYJFnZMDv+5aYZJIk9UXVlw5ZuDqrni2sAAGCesZntgnzTbKyIULfsbKxkx3nZiknzvloPAADmFWP+HxY5fI5HpEs5AAAAAElFTkSuQmCC

Panelview Help

ngilbert

Member

dmroeder

Lifetime Supporting Member

ngilbert

Member

tarik1978

Member

swimmy67

Lifetime Supporting Member

dmroeder

Lifetime Supporting Member

Slwagner73

Lifetime Supporting Member

Similar Topics