Hey Everyone,
I have an AB PLC 5/80B processor that has a comms fault on Rack 14 which is a Flex ASB adapter the module has a flashing green light "ACTIVE" all the other racks have a solid ACTIVE light. I have checked the channel status file and it has a F fault indicted in RSLogix 5. S:32L word shows a 1 against rack 14. I have taken the following action...
Replace the ASB with a known good one
Replaced an analogue input module in the rack
Tried to clear the fault on the channel status page
Tried to reset the fault with the ASB's reset button.
1
Any help would be appreciated
Andrew
I have an AB PLC 5/80B processor that has a comms fault on Rack 14 which is a Flex ASB adapter the module has a flashing green light "ACTIVE" all the other racks have a solid ACTIVE light. I have checked the channel status file and it has a F fault indicted in RSLogix 5. S:32L word shows a 1 against rack 14. I have taken the following action...
Replace the ASB with a known good one
Replaced an analogue input module in the rack
Tried to clear the fault on the channel status page
Tried to reset the fault with the ASB's reset button.
1
Any help would be appreciated
Andrew