Secpcb
Member
I only have one machine here with a ControlLogix PLC. It uses firmware 20.04 and I have RSLogix 5000 Full Edition.
I am experienced with RSLogix 5, RSLogix 500, Siemens and Mitsubishi, and the few updates I have done so far have been easy to figure out. However, now I have to add some arrays.
I need to add 2 DINT arrays, 19 and 25 DINTs, and 5 bit arrays, all 25 bits.
I have searched the forum, gone through the help section, and looked through the programming manuals, but all I can find is go to Data Types/User Defined and create an array.
When I do that it asks for a name, description and members, but nowhere does it have an entry or checkmark for it to be an array, or how long the array is to be.
Can someone guide me through making a 19 DINT array called VibNumBad?
I know how to address and use array entries that already exist, but something on the create just isn't clicking with me yet.
I am experienced with RSLogix 5, RSLogix 500, Siemens and Mitsubishi, and the few updates I have done so far have been easy to figure out. However, now I have to add some arrays.
I need to add 2 DINT arrays, 19 and 25 DINTs, and 5 bit arrays, all 25 bits.
I have searched the forum, gone through the help section, and looked through the programming manuals, but all I can find is go to Data Types/User Defined and create an array.
When I do that it asks for a name, description and members, but nowhere does it have an entry or checkmark for it to be an array, or how long the array is to be.
Can someone guide me through making a 19 DINT array called VibNumBad?
I know how to address and use array entries that already exist, but something on the create just isn't clicking with me yet.
Last edited: