s7 300 and laptop connection

ghanim

Member
Join Date
Jan 2010
Location
africa
Posts
6
hey guys

I'm wondering about a cheap effective way to connect my laptop with an S7 300 seimens device which its CPU is 312, please help me out
 
This site have some real cheap adapters at 80 USD:
http://www.plctrainer.net/PLCProgrammingCables.htmhttp://www.plctrainer.net/PLCProgrammingCables.htm
(scroll down almost to the bottom)

Forum member GiT works for them (I think), so you can complain to him if it does not work ;)
Jesper, I think he's the man there, if you get my drift.

I have tested his S7-200 cables and these work like a charm. Don't know about the MPI cables, but if he's as thorough as with the PPI cables, I'm sure it's a great deal.

Kind regards,
 
how to get it

Thanks alot,I visited the site I see the cable but I have some troubles some are technicals that is does this cable work with the OS Vista home prenium and the other problem is how to get because as you see I'm from Sudan and I have no credit card so please can any one help me to get this cable in another secure way "I'm talking about the payment method". Please help me out it is urgent

Thanks in advance

This site have some real cheap adapters at 80 USD:
http://www.plctrainer.net/PLCProgrammingCables.htm
(scroll down almost to the bottom)

Forum member GiT works for them (I think), so you can complain to him if it does not work ;)
 

Similar Topics

Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
138
Hello PLCS.Net Forum, First time posting. Let's assume I am a novice. BASIC PROBLEM: My servo/linear piston is no longer zeroed to the...
Replies
9
Views
205
hi... i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...
Replies
2
Views
107
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
85
Dear sir, I am using SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 RAM 32KB, Firmware=V4.0.8 The problem Im using MPI...
Replies
2
Views
161
Back
Top Bottom