Remote I/O in Softlogix

jomm

Member
Join Date
May 2010
Location
Makati
Posts
1
I just want try to communicate a Remote I/O to Softlogix. I already add and configure Ethernet communication module for Softlogix. I also clear the "accept UDP messages on ethernet port" in RSLinx. Still i got a communication timeout in ENBT module configured in the network.
Softlogix connection to ENBT.jpg
 

Similar Topics

I have to provide remote access and control to a touch screen. I was thinking about using Weintek and the Weincloud. Does anyone know if this is...
Replies
1
Views
98
Folks, I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Replies
0
Views
64
Hello, I presently have a Allen Bradley PanelView 5310 at a client site and i can access to the PLC/HMI local network with a remote module...
Replies
4
Views
89
Hello, I have been trying to figure out how to connect to and monitor a DLR that is on a remote rack from my PLC. The local has a 1756-L81E and...
Replies
0
Views
80
Hello everybody, I am working for an OEM and we are in the process for trying to raise the effectiveness of the pretesting of machines. Basically...
Replies
20
Views
618
Back
Top Bottom