You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old November 13th, 2018, 07:21 PM   #16
Kamputty
Member
United States

Kamputty is offline
 
Join Date: Nov 2018
Location: Santa Cruz
Posts: 14
Hazzah!

Got it...My tags on the PLC side were on the routine, not the controller. Moving what I needed onto the controller and the HMI see's them!

THANK YOU EVERYONE

If you're in the Santa Cruz area, let me know and I'll buy you a beer or three.

~Kam
  Reply With Quote
Old November 14th, 2018, 05:42 AM   #17
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 5,889
Quote:
Originally Posted by Kamputty View Post

If you're in the Santa Cruz area, let me know and I'll buy you a beer or three.
Ha.... How's Santa Cruz these days, I use to live in Mt Hermon and worked in Fremont, I hated that commute im sure its worse I moved to SC about 20 years ago
__________________
www.PLCCable.com PLC Communication Cables, PLC Trainers, Fluke Meters, MicroLogix, ControlLogix, Siemens, Allen Bradley and more... all your automation needs... ((NEW)) After Market 1784-U2DHP Allen Bradley USB to DH+ and Gateways
  Reply With Quote
Old November 14th, 2018, 09:11 AM   #18
Geospark
Lifetime Supporting Member
Ireland

Geospark is offline
 
Geospark's Avatar
 
Join Date: Feb 2012
Location: Kildare
Posts: 2,484
Quote:
Originally Posted by Kamputty
Hazzah!

Got it...let me know and I'll buy you a beer or three...
Thank Jebus for that! I thought at one stage it would be more like a "Bar brawl" than a "few Beers"

This technote includes the firmware revisions I mentioned and some of the other good info the Forum members provided you on adding a CompactLogix 5370 controller to a PanelView 800 project...

774421 - PanelView 800 Terminals: Communication with CompactLogix 5370 Controllers via Ethernet
Access Level: Everyone

Via Ethernet now, not USB!

Regards,
George
__________________
"A little nonsense now and then is relished by the wisest men".
  Reply With Quote
Old November 26th, 2018, 03:57 AM   #19
ktwei
Member
Malaysia

ktwei is offline
 
Join Date: Nov 2018
Location: kuala lumpur
Posts: 1
Hi bro, my case is actually similar with yours which is I cant communicate between my PLC and panelview800, I am not sure for this step that you mention here, I have configured the tags in studio 5000 by moving those tags into controller tag and others is same , but I still get the error in HMI which shows "10:write error for alias WTAG0001, Controller PLC-1, address is WTAG0001, Communication Flag is 0". Is it anything I could miss it ?
WTAG0001 is a tag name for the momentary push button in CCW
  Reply With Quote
Old December 6th, 2018, 10:29 PM   #20
Kamputty
Member
United States

Kamputty is offline
 
Join Date: Nov 2018
Location: Santa Cruz
Posts: 14
Santa Cruz is, well, Santa Cruz! more tech is moving in here, so going over the "hill" is not a given. I for one go to monterey (reverse commute)...

~Kam
  Reply With Quote
Old December 6th, 2018, 10:30 PM   #21
Kamputty
Member
United States

Kamputty is offline
 
Join Date: Nov 2018
Location: Santa Cruz
Posts: 14
Quote:
Originally Posted by ktwei View Post
Hi bro, my case is actually similar with yours which is I cant communicate between my PLC and panelview800, I am not sure for this step that you mention here, I have configured the tags in studio 5000 by moving those tags into controller tag and others is same , but I still get the error in HMI which shows "10:write error for alias WTAG0001, Controller PLC-1, address is WTAG0001, Communication Flag is 0". Is it anything I could miss it ?
WTAG0001 is a tag name for the momentary push button in CCW
make sure the tag is "writable" (make them R/W for testing...)
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:36 PM.


.