You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old December 7th, 2018, 12:27 AM   #1
ILJSB
Member
South Korea

ILJSB is offline
 
Join Date: Dec 2018
Location: Seoul
Posts: 5
Rockwell RSLogix5000 Upload Fatal error

Hello, I'm Ki,
My English is not good, please understand me.

I have to upload program from 1756-l55/A because our customer deosn't have a original program to maintenance.

The processor firmware is 8.90 (Redundancy version) in RSLinx.

so, I installed RSLogix 5000 V8.52 to my laptop on Windows XP mode(Virtual)and then I did program uploading but I've got a Fatal error while uploading as follow.

//
There was an unspecified communications problem.
RSLogix 5000 has been taken offline.
//

//
Fatal Error!
Application Path:C:\Program Files\Rockwell Software\RSLogix 5000\Bin\RS5000.exe

Version: V8.52.00
Source File: aftrans_offline.cpp
Line Number:557

Error 0x80042938 (-2147210952)

R***E_CONTROLLER_STILL_REFERENCED - Controller still being referenced.

Press OK to terminate this application
//

I tried to upload from other processor (They have 2 CPU for redundancy) but have got same issue.

Well.. I googled solution of that issue but I did't get any infomation.
Also, There is no solution in Rockwell Automation Knowledgebase.

Finally, I did test downloading and uploading a new program that has just 1 rung of main routine.
There was no issues. It is totally perfect.

However, I can't upload it from processor that has file they want.
Please, Check attached files.


Anyone had this and found a solution?


Best Regard.
Attached Images
File Type: jpg 1.jpg (70.5 KB, 11 views)
File Type: jpg 2.jpg (42.9 KB, 8 views)

Last edited by ILJSB; December 7th, 2018 at 01:10 AM.
  Reply With Quote
Old December 7th, 2018, 03:20 AM   #2
rgua
Lifetime Supporting Member
Italy

rgua is online now
 
Join Date: Mar 2003
Posts: 141
"XP mode(Virtual)"

Perhaps your PC's operating system is 64-bit?
Old communication drivers do not work on a 64-bit platform.
try from a true installation of WinXP
  Reply With Quote
Old December 7th, 2018, 03:42 AM   #3
daba
Lifetime Supporting Member + Moderator
United Kingdom

daba is offline
 
daba's Avatar
 
Join Date: Jul 2004
Location: uk
Posts: 4,407
This might be related to the "redundancy" situation.


You could try uploading the Primary controller with the Secondary disconnected.
__________________
___________________________
ControlLogix & SLC Training
a-b train ltd.
abtrain@tiscali.co.uk
www.abtrain.co.uk
tel: 07506 73 9999
nil illegitimi carborundem


  Reply With Quote
Old December 7th, 2018, 03:42 AM   #4
ILJSB
Member
South Korea

ILJSB is offline
 
Join Date: Dec 2018
Location: Seoul
Posts: 5
Quote:
Originally Posted by rgua View Post
"XP mode(Virtual)"

Perhaps your PC's operating system is 64-bit?
Old communication drivers do not work on a 64-bit platform.
try from a true installation of WinXP
Thanks for your reply.

My operating system is Windows 7_64bit.

I think, Communication driver do work normal because I've done download and upload new program I made.
But I can't upload it only they want.

Anyway, I'm trying to test on true installation of WinXP.

Last edited by ILJSB; December 7th, 2018 at 03:45 AM.
  Reply With Quote
Old December 7th, 2018, 03:51 AM   #5
ILJSB
Member
South Korea

ILJSB is offline
 
Join Date: Dec 2018
Location: Seoul
Posts: 5
Quote:
Originally Posted by daba View Post
This might be related to the "redundancy" situation.


You could try uploading the Primary controller with the Secondary disconnected.
Thanks for your opinion.

So, I took off a processor from their system.

And only use 1756-L55 and 1756-ENBT...I got a same error

Do I test Primary controller on thier system without Secondary?
  Reply With Quote
Old December 7th, 2018, 04:49 AM   #6
chopin
Member
United Kingdom

chopin is offline
 
Join Date: May 2012
Location: Milton Keynes
Posts: 141
Hi,

There is couple of topics on knowledgebase related to: Error 0x80042938 (-2147210952)

It seems to be more like a program access error.

If still trying to find a solution drop rockwell and email with the program and problem and maybe they will be able to help you.

It is just you will probably need to wait day or two for an answer.

Try a web chat with support so maybe they get on the problem straight away.
  Reply With Quote
Old December 7th, 2018, 07:12 AM   #7
ILJSB
Member
South Korea

ILJSB is offline
 
Join Date: Dec 2018
Location: Seoul
Posts: 5
Quote:
Originally Posted by chopin View Post
Hi,

There is couple of topics on knowledgebase related to: Error 0x80042938 (-2147210952)

It seems to be more like a program access error.

If still trying to find a solution drop rockwell and email with the program and problem and maybe they will be able to help you.

It is just you will probably need to wait day or two for an answer.

Try a web chat with support so maybe they get on the problem straight away.
I already read that topics.
Those solutions are not my case.

And, They donít have original program.
Actually, This is problem.

Yeah, Iíll contact the webchat as you told me.
Thank you for your reply.
  Reply With Quote
Old December 8th, 2018, 02:41 AM   #8
tarik1978
Member
Morocco

tarik1978 is offline
 
Join Date: Mar 2010
Location: casablanca
Posts: 399
Fatal error uploading from a Redundancy Controllogix Controller
https://rockwellautomation.custhelp....il/a_id/698810
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Retentive data lost Micrologix1000 Deer LIVE PLC Questions And Answers 15 March 23rd, 2018 10:28 PM
Micrologix 1400 Fault 0052H caleno LIVE PLC Questions And Answers 15 March 15th, 2018 08:42 AM
Fatal error in rslogix5000 with windows10 Rutesh M Deshmukh LIVE PLC Questions And Answers 5 December 29th, 2017 12:29 AM
S7 Upload Hardware error - (2000) Error while uploading the configuration... uptown47 LIVE PLC Questions And Answers 5 May 31st, 2013 04:52 AM
Omron Cj1m glenncovington LIVE PLC Questions And Answers 10 March 7th, 2012 06:01 PM


All times are GMT -5. The time now is 12:07 PM.


.