Inhibit Modules in Siemens

rscott9399 · Feb 19, 2019

So everyone knows how to inhibit a module in studio or rs5000

I need to do the equivalent in tia portal 15.

Need to run some test code but my cards are not in my office and remote racks are not online.

How can i get the cpu into run like in AB land?

s7-1200

Thanks

sigmadelta · Feb 20, 2019

Insert the Organization Blocks for Rack Failure and I/O failure in your program to prevent the CPU from stopping.

Rob... · Feb 20, 2019

sigmadelta said:
Insert the Organization Blocks for Rack Failure and I/O failure in your program to prevent the CPU from stopping.

That means you still have error lights on the CPU. However if this is not an issue, the easiest solution.

There is an SFC to enable/disable remote hardware.

See page 268 of this manual:

https://cache.industry.siemens.com/dl/files/574/1214574/att_44504/v1/SFC_e.pdf

SFC12

BryanG · Feb 20, 2019

In 'Device View' there is a button that opens an area called 'Modules not plugged in', you drag local modules to that storage area.

rscott9399 · Feb 22, 2019

BryanG said:
In 'Device View' there is a button that opens an area called 'Modules not plugged in', you drag local modules to that storage area.

Thanks!

Inhibit Modules in Siemens

rscott9399

Member

sigmadelta

Member

Rob...

Lifetime Supporting Member

BryanG

Member

rscott9399

Member

Similar Topics