paramesh1990
Member
Helo
Am trying to connect a Maple system's HMI with Baldor NextMove ESB2 controller. But there is some communication error always. I have connected the RXD,TXD and signal ground. What else should i do in order to establish connection. Using EasyBuilder 5000 for programming HMI.
Am trying to connect a Maple system's HMI with Baldor NextMove ESB2 controller. But there is some communication error always. I have connected the RXD,TXD and signal ground. What else should i do in order to establish connection. Using EasyBuilder 5000 for programming HMI.